Should you go with used or new excavator parts? Pros and cons!
Excavators are heavy duty pieces of equipment, but even they can end up malfunctioning sometimes. And that’s why, down the line, you will face the issue of getting replacement parts for your unit. That does bring the question, should you go with used or new excavator parts? We’ll find out here!
New excavator parts
Obviously, the best approach is to invest in high-quality, new excavator parts. Sure, replacements exist on the market, but they are used, so they are going to last you less than a new part. And on top of that, used products already have some wear and tear on them. So it’s possible they might end up not lasting as much as you want.
Pros
Manufacturer warranty
Another benefit that comes from new excavator parts is that you get to access a warranty from the manufacturer. That matters because you can get a replacement part in case of manufacturing defects or any other situations. Plus, the part can also be repaired under the warranty, which is great.
When you buy new radiators, final drives, excavator booms, buckets, or hydraulic cylinders/oil coolers for your CAT 320C, you should always aim for anywhere from 3-4 years of warranty. Some repair parts might not have a warranty, and that means any repairs you make will be done out of pocket. However, if the manufacturer’s warranty covers them, you don’t need to worry about any repairs.
Increased lifespan
What’s important to note about new excavator parts is they are very durable and withstand a lot more pressure. They last for a lot more time, which means going with new parts is imperative if you care about your excavator’s reliability and ease of use. These parts are guaranteed to give you years of service without any headaches, and that can mean a lot for companies that use excavators on a daily basis.
Accessing the latest technologies
Another benefit to note about new excavator parts is that manufacturers improve designs and even add new features over time. That means you’re getting the latest improvements and benefits if you go with a new excavator part. It’s very helpful to do so, since you will have the same compatibility, yet with improved efficiency and durability, among others.
Compatibility with modern equipment
Used parts might not always fit modern equipment. It’s another reason why you want to go with new excavator parts, because you are guaranteed to have amazing efficiency, impressive value for money, and no compatibility issues. And in doing so, you replace the need to buy replacement parts soon. You’re saving money, and you get an excellent ROI, which is extremely important to consider.
Cons
New parts have a few downsides. For example, they are more expensive when compared to used excavator parts. And since they are new, when you place an order, you have to wait until the manufacturer can deliver those parts. While they are ideal for mission-critical repairs, they are an expensive option if you need very minor repairs.
Used excavator parts
Of course, if you’re on a very tight budget, you might not always have money for new parts. In that case, going with used ones might be the best idea. Depending on the situation, you could save up to 30-40% if you choose to go the used route. Yet, as you can imagine, it also has its downsides if you choose used excavator parts instead of new ones.
Pros
Cost-effectiveness
As we mentioned above, you can save quite a bit of money if you buy used parts. You can find them on various online marketplaces, but also in salvage yards or at equipment dealers. But they are sold as-is, usually without warranty.
No more waiting
When you order new excavator parts, you will need to wait for a bit until the delivery is made. If you are in a rush to do the repairs for your 320C excavator. Getting used 320C diesel engines and parts, starter motors, seal kits, steel track chains, or other crucial components might be good if you want to avoid waiting and obtain immediate availability. If you go for new parts, you will have to place an order and wait for their delivery, which could take days or weeks, depending on the supplier.
Good compatibility for older machines
Since used parts tend to come from older machine, these tend to be compatible with older units. Sure, you still need to check for compatibility, just to ensure everything is ok. But all in all, you’re getting the parts you need now without worrying about compatibility that much.
Cons
Maybe the worst thing about used excavator parts is that you rarely know where they come from. You don’t have any idea about that part’s history, how it was used, if it was abused, damaged and repaired, etc. Naturally, you want to know what you buy, and this is more of a lottery.
On top of that, used excavator parts tend to last for less time when compared to new parts because these were already used for a while. They also come with either a limited return policy or, even worse, no warranty at all.
Which is the better option?
It always depends on the situation and what you need currently. Used parts are only good when you have minor repairs, and you’re ok with the idea of replacing that part with a new one sooner rather than later.
However, if you need excavator parts, you always want to buy new ones. They offer a warranty, maximum longevity, great performance for mission-critical situations, but also a solid return on investment. They last for a very long time, and in the end, it’s the logical approach for any business.
There are a multitude of different quality excavator brand parts, which can make it difficult to pick the right ones. However, Amoparts.com is your one-stop online excavator parts supply platformthat covers all major brands, and we can provide any part you need, and every purchase comes with a very high quality after-sales service. All you must do is browse the website to find the part you need, or you can get in touch for more information!
You may also be interested in:What’s the difference between genuine, OEM, and aftermarket parts?
